A rashin laifi mai ƙyalli shine kayan aikin da aka shirya tare da ainihin yin tsufa na halitta. An goge kansa daga babban-hanunci, babban-mai sheki da aka tsare shi zuwa katako ko filastik mai filastik ta hanyar ferrule (kamar ƙarfe). Agate yana da wahalar 6.5-7, na biyu kawai ga lu'u-lu'u da dutsen. Tsarin dattako a zahiri yana sa ya dace da kyakkyawan poking na baƙin ƙarfe (kamar gonar zinare da azurfa), fata, da zanen substrates.
1. Bayyanar da tsari
Tsarin kai
Hanyoyi daban-daban:
Lebur: Ya dace da polishing lebur lebur (kamar hotunan hoto da zane-zane). Model No. 16, alal misali, fasali kai mai kauri daga cikin 0.5mm, bada izinin ingantaccen sarrafa matsi.
Sword / tarper: Ya dace da cikakkun bayanai na polishing ko tsagi (kamar kayan adon ƙarfe da kayan adon kayan ado).
Zagaye: Ya dace da zubar da ruwa mai lankwasa ko manyan wurare (kamar fata da beros), cimma wani uniform mai sheki ta hanyar tashin hankali tashin hankali. Jiyya na farfajiya: Shugaban ya yi matakai na kudaden da yawa zuwa wani surfacewar Ra ≤ 0.1μm, tabbatar da karfin-kyauta.
Tsarin sarrafawa
Kayan abu: yawanci aka sanya shi da katako (kamar eBony ko kuma tragnut) ko filastik mara nauyi, 15-25cm a tsayi, don rikodin rayuwa mai kyau da kuma Ergonomic.
Haɗin: An kulle keɓaɓɓun ƙarfe zuwa rike da zaren ta hanyar zaren ko gluing don tabbatar da zaman kwanciyar hankali.
2. Amfani da dabarun aiki
Hanyar aiki ta asali
Karfe tsare na karfe:
Jira sa na zinare / azurfa don bushe sosai (yawanci bayan sa'o'i 24).
Riƙe sanda a kwana 45 °, a hankali latsa tsare tsare tare da shimfidar shimfidar sanda na sanda na 2-3cm a sakan na biyu.
Maimaita sau 2-3 har zuwa saman ya cimma ruwan madubi-kamar gama.
Polding na fata:
Aiwatar da karamin adadin kakin zuma ko kwandishan mai mai zuwa fatar fata.
Yi amfani da sandar tsufa mai zagaye a cikin motsi madauwari, rike da matsin lamba na 0.5-1n don guje wa haɗarin wuce gona da iri.
Dabarun manyan dabaru
Gudanar da matsin lamba: Lokacin da aka kwafa ƙarfe na ƙarfe, matsi ya kamata ya zama ≤0.3n; In ba haka ba, tsinkayen saman zai iya fashewa.
Daidaitawa: Polishing a cikin wannanbani guda na iya guje wa haske da rikicewa a kwance (misali a kwance, kwance a kwance ya dace da yanayin rubutu na rubutu).
Gudanar da zazzabi: AMFANIN AMFANI DA AKE YI KYAUTA, ana buƙatar sanyaya mafi tsufa don hana daskararren zafi na agate (Tsaro na minti na 2 ana bada shawarar kowane minti 15).
3. Aikace-aikace na aikace-aikace da karfin masana'antu
Gargajiya na gargajiya na gargajiya
Aikace-aikace: Zane-zanen addini, kayan ado na gine-gine (misali, gidaje,
HUKUNCIN CORE: cimma ruwa 0.1μm kamar mai sheki da haɓaka ganye na zinare
Kayan Gida
Aikace-aikace: Antique Kayan Kayan Kayan Gidaje, Inll Bayani Clight
Hukumar Core: Daidai sarrafa kewayon polishing don gujewa Damuwa Gemstones
Halitta fasaha
Aikace-aikace: hade da zanen kafofin watsa labarai, jiyya na zane
Hukumar Core: Createirƙiri matsalar Matte-Mattos Bangare da haɓaka Layer
Kayan Fata
Aikace-aikace: kayayyakin fata na fata, madauri mai ban sha'awa
Core aikin: Adana da kayan fata na dabi'a yayin inganta astile ji
Nazarin shari'ar: A lokacin maido da firam na Mona Lisa a Loavre, an yi amfani da masu siyar da karni na karni zuwa kashi 90% na luster na zinare ba tare da lalata zanen.
4. Zabi: Yadda za a zabi mai bintiyar agate mai kyau
Zaɓi da sifar kai
Don lebur polishing: nau'ikan lebur (aya ≥ 10mm) an fi son su. Bukatar Kula da Tsammani: Takaddun takobi - Conical (Tipaƙwalwa) ≤ 0.5mm).
Mai lankwasa polishing: zagaye kai mai zagaye (diamita 8-15mm), ya dace da saman hanyoyin kamar kaya da yumbu.
Zaɓi da girman
Jimlar tsawon: 15-20cm don m aiki, 25cm da sama ga manyan polishation.
Shugaban kauri: ≤1mm na karfe tsare na polishing, 3-5mm don polishing fata.
Matsayin tantance mahimman bayanai
Tsohon tsattsauran: zaɓi mai tsufa na halitta kyauta kyauta na fasahar (tsarin ciki (tsarin ciki za'a iya lura dashi ta amfani da mai ƙarfi walƙiya).
Polishing daidai: ya kamata ya zama kyauta na bayyane (ana iya tabbatar da amfani da amfani da gilashin girman girma 100x).
Hannun Jahim: Ya kamata babban yatsa da yatsa index ya kamata a ɗauka a zahiri lokacin da aka gudanar, kuma ya kamata a yi tashin hankali a wuyan hannu.
5. Kulawa da Kulawa
Tsaftace na yau da kullun
Shafa kai tare da zane mai taushi nan da nan bayan amfani don hana bokar dabi'ar ƙarfe daga Corroding The Agate surface surface surface surface.
Yakamata 'yan sanda na katako ya kamata ya bukaci aikace-aikacen beeswax don hana fatattawa.
Ajiya na dogon lokaci
Adana kai zuwa sama a cikin kwanon bushewa, guje wa tasiri tare da m abubuwa (agate yana da gagara da ƙarfi da kuma saukin ƙanshi idan ya faɗi ba).
Ku nisanci mafi girman yanayin zafi (kamar kai tsaye ko kusa da masu hirun wuta) don hana fadada yaduwar zafi da ƙanƙancewa da zai iya kwance ferrule.
Gyara na yau da kullun
Bincika haɗin tsakanin ferrule da kuma rike kowane watanni shida don kwance. Idan sako-sako, sake amintaccen tare da manne na musamman.
Sauya Shugaban idan aka sanya ya wuce 30% na ainihin kaji (yawanci, ingancin tsufa mai kauracewa sanda yana da renapan na shekaru 5-10).
SAMINA FORAM (SHENZHEN) CO., LIMITED.
